Showing posts with label Revit Tips. Show all posts
Showing posts with label Revit Tips. Show all posts

Thursday, October 23, 2014

Revit 301: Copying Spaces from a host model to multiple consultant models

Some time ago I was working on a large project with an extensive Facilities Management component planned for post-occupancy. Because the designated FM software cannot pull Space data through a linked model for the various MEP trades, each one of the 15+ design consultant models needed to have all of the necessary Spaces within the models.
That's a lot of repetition, especially considering there were six separate models with room bounding elements. A process made even more challenging because the design models continued to change after CDs were issued as outstanding design issues and decisions were resolved.
As a result, the decision was made to model the spaces in a single model, then once everything was finalized and approved by the designer, client, and FM consultant, to have each consultant copy the spaces from the Spaces model into their own.
As it turns out, I was lucky enough to draw the straw for making this all work.
The space tool is on my personal list of least favorite Revit tools, and I anticipated a fair bit of frustration in working with it under these conditions. What I hadn't anticipated was the dance I eventually had to do in order to make it so the spaces could be copied with an absolute minimum of fuss into the mass of consultant models. As I hadn't come across any tips for putting this process together, I thought I should share it here.
This post assumes you already know how to place and work with spaces. In fact, it assumes that effort has been completed and you're just looking for a way to get your information propagated into a bunch of other models. If you need help working with spaces, other resources already exist addressing that, though I will likely post something with lessons learned along those lines eventually as well.
The setup process for prepping the Spaces source model for copying is below, followed by the process for copying sent to all of the design consultants.
1. Determine which Levels have spaces on them and which do not.
2. Create a view for each Level that has Spaces on it. Create a View Template for those views and hide all modeled elements, annotation and linked files. Hide everything except for space elements. Turn on References and Fill for the space elements.
3. Create a schedule of all spaces (Spaces by Level) with the Level and Count fields in the schedule. Sort it by Level and uncheck Show All Instances. This will ay space hosted to each Level, and only spaces hosted to that Level, with a single click.
4. Open up your first Level side by side with the Spaces by Level schedule. Select the line for that Level in the schedule, this will select all of the spaces for that Level. 
5. Switch to the plan view (Alt+Tab), being careful not to deselect the Spaces you have selected
6. Check the count from the Filter Tool against the count for the Level in the Spaces by Level schedule. They should match exactly. Also take a quick look at the Host Level in the Properties window, this should list just the current level you're working with. If it doesn't, then you have spaces for other levels still visible in the view.
7. Repeat steps 4-6 for all of the other Levels which host Spaces.

Friday, January 3, 2014

Revit Tip of the Week: Wall Openings

What's the difference between using the Wall Opening tool, an opening family (found with the doors and windows), and using the profile tool when it comes to creating openings in walls?

An opening family will respect the room bounding qualities of a wall. So if you want an opening between two rooms, but want them to remain two separate rooms, use an opening family.

The Wall Opening tool and using Edit Profile will change the room bounding of the wall. So if you want two areas to be a single room, use the Wall Opening tool. While Edit Profile will usually work as well, Edit Profile doesn't work on curved walls. Wall Openings do cut curved walls, as do opening families so as a standard, use an opening family or the Wall Opening tool depending on whether you need room separation or not.

Why not just make the Wall not Room Bounding and not worry about whether it's an opening family, Wall Opening or Edited Profile? Because that will affect the square footage of the room. Turning of Room Bounding will count the space covered by the wall in the calculations, and that's not something we generally want to do.

For additional information, check out Steve Stafford's Revit OpEd blog:
http://feedly.com/k/1kDDCqB

Wednesday, June 20, 2012

Revit Tips: Referencing Sheet or Back Referencing

Revit has a parameter built into views called Referencing Sheet (which is also known as Back Referencing). Referencing Sheet lists the sheet number that a view placed on a sheet is referenced from. For instance, if a floor plan on sheet A2.01 - FIRST FLOOR PLAN shows a section cutting through a wall and the reference on that sheet is 1/A3.05. If you look at view 1 on sheet A3.05, you'll find the section cutting through the wall. On that view title may also be a Referencing Sheet field telling you when you look at that view that the section was cut on sheet A2.01.
 
Pretty useful and logical right?
 
Unfortunately, the Referencing Sheet value doesn't always reference back to the sheet that you would expect it to.
 
Let's say you have a set of drawings set up as:
 
A0.XX General
A1.XX Site
A2.XX Plans
A3.XX Sections
A4.XX Elevations
A5.XX Enlarged Plans
A6.XX RCP
 
And you have a section that you want to place on a sheet in the 3.XX series. Why do you get a back reference number from a Site Plan (1.XX) or other view if you created the section in a Floor Plan (2.XX)?
 
Referencing Sheet lists the first sheet, in order, that has a reference to that view. So if the section mark is showing in the Site Plan, it will show as the Referencing Sheet on the sheet for that view. To change that, hide the section annotation in the Site Plan. The Referencing Sheet will then look for the next sheet to have the section mark.
 
Fortunately, if the Referencing Sheet is listing a view that is different from what you want it to show, you know right where to look because the Referencing Sheet parameter tells you what sheet to look at..
 
One place where Referencing Sheet values can get more fouled up is with Dependent Views.
 
Let's say you've got a floor plan split into two areas, A to the west/left and B to the east/right and both plans are Dependent views off of the same Parent view. If you have a section, elevation or other callout in Area B, then when you place that view on a sheet, it may very well list the sheet that Area A is on as the Referencing Sheet. This is a bug related to how Dependent views relate to each other via the Parent view. What you will need to do is go into the view for Area A, uncrop the view, find the section/elevation/callout annotation for that view and hide it manually.
 
It can be a frustrating process at times and obviously the tool needs some tweaking, but all in all it's a useful tool and beats entering the information manually.

Tuesday, June 5, 2012

Revit Tips: View Title Wrapping

View title lengths can sometimes wrap in awkward ways in Revit.
For instance, a view may be named "ENLARGED POWER AND COMMUNICATION PLAN - EIGHTH FLOOR - JS-1 ADA" but when it's placed on a sheet, it ends up looking like this:
ENLARGED POWER AND COMMUNICATION PLAN - EIGHTH FLOOR - JS-1
ADA
​
Not exactly what we want to see graphically.
If you go into the View Properties, you can see two parameters under Identity Data that can help you fix this. The first is View Name, which is the name of the view as you will see it in the Project Browser and as it will appear on the sheet.
Below View Name is Title on Sheet, which will override the View Name on the sheet. You can also control where the line break will occur in this parameter by holding 'Ctrl' and pressing 'Enter'. Using this approach, we can change how the View title appears on the sheet to something a little more graphically sensible:

ENLARGED POWER AND COMMUNICATION PLAN
EIGHTH FLOOR - JS-1 ADA

Additionally, since Title on Sheet does not need to be unique, you can use this parameter to give multiple views the same name on the sheet.

Title on Sheet is something that should generally be used sparingly, only when absolutely necessary. Having to manage the Title on Sheet parameter as well as the View Name for every single view could lead to confusion and consume time better used on other aspects of the model.